Structure

- “I” shape chassis manufactured in high resistant structural steel
- Structural steel “G” crossbeams (LN- 20- NBR 6655), folded and connected to the girders
- Flange Ø 2” king pin, according to Brazilian standards (NBR 5548)

Suspension

- Front and rear equalizer suspensions tandem type
- Central scales with tempered pins;
- Fixed and adjustable turnbuckle arms with molecular bolts for the axle’s alignment
- Strengthened leaf springs, treated by "Shot Peening"
- Side supports with moving scrub, allowing fast exchange.

Cargo Box

- Structured with chassis
- 300 mm wide corners facilitating the discharge;
- Long crease model
- Sides and floor in high resistance structural steel
- Tilted front for free access to the cylinder and easier unloading;
- Sides strengthened by rods, in structural steel, cold printed
- Single panel back cover with: upper joint, safety latch system and automatic breaking;
- Extra wide bearings providing stable tilting
- Stabilizer for safer tilting, in straight box.

Accessories

- Front and side ladder, inside and outside;
- Side Rod
- Two speed mechanic Jack
- Metallic tool Box
- Water and soap keg
- Two-tire step holder, tow type, in the front, or hamper type, under the chassis;
- Pneumatic suspender in the 1º axle
- Hooks for tarpaulins
- Bumpers in accordance with Brazilian resolutions (COTRAN 152/03)
- Mudguards manufactured with high resistance plastic;
- Rubber mudguards
- Reflective bands
- Anti trepidation system in the backlights

Optional items

- Hydraulic drive in the tractor truck
- Tilting rear cover and side opening
- Double rear cover and side opening;
- Hydraulic or hydro pneumatic uplifting
- Proper coupling to 4x2 and 6x2 vehicles (two position king pin table);
- Draining outlets
- Wooden height extension;
- Kitchen box
- Special Painting
- Adhesive Bands
- Tires
- Pneumatic Suspension
- Disk wheel hubs
- Aluminum Wheels
- Pneumatic shackle in the 3rd axle
- ABS brake System
- Automatic brake adjuster
- LED Lights.

Axles

- Pipe type Axle of cylindrical section, 19 mm wall and cargo capacity of 13 tons each;
- Supplied with 13 wheel frames for chamber tires (optional chamberless tire).

Air installation

The items of the system are:
- Air reservoir
- Air fittings type “Quick fitting”;
- Distribution; valves
- Fast discharge valve
- Air pipes made of high resistance nylon tubes.

Hydraulic installation

- 5 /6 stages telescope hydraulic Cylinder with upper grating and axle bearing in the chassis
- Work Pressure of 175 kgf/cm²;
- End of course Valve in the chassis

Brakes

Compressed air system, "tubeless", 16,5x 8" wide and “S "came system;
- Two feeding lines (emergency and service), in accordance with Brazilian standards (Resolution 777/93 CONTRAN), guaranteeing the system security
- Second and third axles equipped with “Spring Brake” brake chambers in accordance with Brazilian standards (Resolution 777/93)